21 year old used 5" marine muffler and exhaust assembly. These were brought in with rust, crevice/pit corrosion, heat discoloration and weld scale. See the Before/After pics!

Very large heavy U pipe for commercial marine application.

Large 6" 316 s/s Tri-Clover pipe section INTERNALLY & Externally electropolished. Used in medical research facility.

CF8M (316 Cast) stainless steel ball valve renewed by electropolishing

Molson Canadian Beer Keg Wall at the 2010 Winter Olympics Venue. Tops and bottoms of kegs were cut off, electropolished and cemented into wall.

Before and Afters of 1" thick heavy millscale plate.

Used and corroded stainless steel wheel chair used in public swimming pools Before/After shots.

Various Electropolished parts

Various pictures of Pickled/Passivated Parts

316 Stainless Steel Screw Conveyor for syrop manufacturing.

Faux gas fireplace sticks made of 304 s/s Pickled and Electropolished

Mechanically Mirror Polished Parts

4 year old electropolished 304 trailer bolts and hardware. Some of this salt water trailers original mild steel fasteners and hardware were so badly corroded they had to be cut off!

Pictures showing in-use electropolished 304 and 316 s/s components on a big block marine engine. Located in a salt water environment for the past 4 years without any sign of failure...The test continues!

A very large 304 s/s spiral pickled and passivated on-site

Omni_directional/artistic ground surface finish on a 3x3 foot 1/2" thick 304 stainless steel plate.

Gallery showing a 100 grit brushed finish on a piece of 2x3 304 SST. With/With-out Electropolishing

Gallery showing a piece of 2x2" 304 stainless SST that was mistakenly brush pickled by fabricator. The problem was easily corrected by electropoishing.

Before and After pics of Electropolished 316 stainless Exhaust pieces for a Nissan 300ZX

Before and after degrease/passivate/electropolish of 316 stainless steel Force 10 Marine Barbeque.

This gallery shows the corrosive nature of Hydrochloric Acid and HCl containing cleaning products on 304 Stainless steel and how electropolishing can restore a better than original finish.

These shots are BEFORE and AFTER Electropolishing of a WELL used Weber Q Barbeque stainless steel burner element.

Parts that have ben electropolished internally

304 s/s square tubing handrail confirming contact contamination/corrosion as a result of contact between part and carbon/mild steel deck-plate of shipper's truck

Pictures of stainless steel architectural Maple Leaf for the 2009 Olympic Village. By renowned artist Wade Baker of Sky Spirit Studio. Artistic abrasive ground finish and electropolished

Architecturally functional artistic stained glass parkade covering

Chilco produced a matt finish for the base of the Vancouver Bayshore Hotel signage. This 304 stainless steel base has been in operation for over 5 years in a water fountain.