Photo Gallery > Medical Research Pipe Internally Processed
-
medi pipe 03 .jpg
Close up of elbow. Note the two different finishes on the straight vs elbow section. This is due to the difference in manufacturing of the individual pieces before welding.
-
medi pipe 02 .jpg
Full length external. Note the two different finishes on the straight vs elbow section. This is due to the difference in manufacturing of the individual pieces before welding.
-
medi pipe 06 .jpg
Close up of elbow and flange. This piece is ultra clean
-
medi pipe 08 .jpg
Internal of flange end strait section. Internal surface has been processed by intricate fixturing. (liquid pooled on bottom is water only) Internal s
-
medi pipe 01 .jpg
Deep internal shot of straight section. (liquid pooled on bottom is water only)
-
medi pipe 04 .jpg
Internal of elbow. Note the difference in finishes between flange vs elbow. This is due the way the individual components have been manufactured.
-
medi pipe 05 .jpg
Internal of elbow. Note: line on surface is the weld seam from manufacturing and is now as completely corrosion resistant as all surfaces.
-
medi pipe 07 .jpg
Deep internal shot of straight section. (liquid pooled on bottom is water only)